Brian Howard of Naperville charged with starting fire at FAA facility in Aurora, FBI says

ByABC7 Eyewitness News Team Coverage WLS logo
Friday, September 26, 2014
Fliers frustrated by Chicago airport fire, hold-ups
Tim Fleischer live at LaGuardia airport

AURORA, Ill. -- Brian Howard, 36, of Naperville has been charged with one felony count of Destruction of Aircraft or Aircraft Facilities after he allegedly set a fire in the basement of an Aurora FAA facility, cut the feeds to the radar and damaged the communications system, forcing a ground stop at Chicago's O'Hare and Midway international airports, ABC7 sources said.

According to the criminal complaint, Howard allegedly entered the FAA facility at approximately 5:06 a.m. with a black hard-sided roller board suit case. The complaint alleges that at approximately 5:36 a.m., a message appeared on a Facebook account in Howard's name that contained a reference to the three-letter call number for the facility. The message was forwarded to law enforcement.

The complaint says paramedics from the Aurora Fire Department then responded to a 911 call placed at approximately 5:42 a.m. by an individual at the FAA center. Paramedics entered the basement and followed a trail of blood that led them to Howard, officials said.

You can read the complaint in its entirety here.

Howard remains hospitalized with self-inflicted stab wounds and is under police guard.

"This is a local issue with a contract employee," Aurora Police Chief Greg Thomas said. "There is no terrorist act."

PHOTOS: Fire at regional FAA facility grounds Chicago flights

"They covered him, attempted to get him out of the building. There was some degree of effort on their part to drag him out of the building. But he was conscious. And as far as being cooperative, I would say not necessarily. They had to fight with him physically," Aurora Fire Department Chief John Lehman said.

Howard was authorized to be in the building, officials said. No firearms were found on the scene, Thomas said.

Howard had intimate knowledge of the building and radar system. According to ABC7 sources, he cut every radar feed to FAA air controllers before setting gas-soaked rags on fire near sensitive equipment and also damaged the communications system.

Radars went dark and the building filled with smoke. FAA employees were evacuated. No one was seriously injured, although a 50-year-old man suffered smoke inhalation.

Officials said water used to put the fire out damaged the sensitive equipment further, and there could be days of potential radar outages at the Aurora facility, which could result in significant flight delays in the Great Lakes region. Without the Aurora facility, planes are moving in and out of Chicago at a "reduced rate" after airspace management was transferred to adjacent FAA facilities.

VIDEO: FAA facility's impact

There are only three routes out of Chicago right now: east toward South Bend, north to Milwaukee, and west to Rockford. Planes have to stay at a lower altitude for a longer time to maintain contact with those smaller facilities, which can only handle about 25 percent of normal operations.

The FAA is beefing up staffing at those facilities and others in the area, and has not said when the repairs will be made to the Aurora building and when controllers can come back to work.

VIDEO: Cancellations, delays at Midway, O'Hare airports

Hundreds of Chicago flights were canceled, delayed and re-routed Friday. Airlines are urging travelers to check the status of their flights at www.fly.faa.gov.

VIDEO: Nothing unusual in suspect's record, officials say

Howard had worked for the Control Center as a contract employee for approximately eight years, according to the criminal complaint.

Naperville police said he also made suicidal threats, prompting his family to ask for a well-being check Friday morning at his Naperville apartment. After speaking with Aurora officials, Naperville officers searched his apartment and found no victims, police said.

Police said Howard had no real record, only a few minor traffic citations from 2007. Sources said he was angry he was going to be transferred with work to Hawaii.

"We don't know what his motive was at this point, and so the evidence is still being collected," Tom Ahern, ATF spokesperson, said.

The contractor was transferred to a local hospital with multiple stab wounds. He is in stable condition and expected to survive.

"The scene is being worked, as with any investigation would, trying to gather all the evidence, interview all the people, collect all the information so we know what's going on," Thomas said.